Value RAM Roundup: Computing On a Budget
by Wesley Fink on April 11, 2005 4:26 PM EST- Posted in
- Memory
The Memories
The first task in our look at Value RAM was to define Value RAM. With top memories selling for $250 to $400 (or even higher) for a 1GB kit, we decided that a price limit of $200 for a 1GB kit (2x512MB DIMMs) of DDR memory would be our cut-off. Admittedly, this excludes some good value Samsung TCCD kits from companies like PQI and Patriot, but these products are really just good buys and marketed by the companies as Performance memory.We requested Value RAM for our review from Corsair, Kingston, Mushkin, OCZ and Transcend as a representative cross-section of the memory industry. We asked these manufacturers to supply a 1GB kit (2x512MB) of a Value RAM product or products that sold on the web for less than $200. We asked them to supply whatever RAM they wished that met these criteria, which we would be comparing in performance to other Value RAM products in a memory roundup.
All the manufacturers supplied one or more samples for testing except Corsair. Corsair emailed us, stating that "Our policy is not to send Value Select parts for review for a variety of reasons. After a quick discussion here we decided to stick with that policy and sit this one out." When we asked for clarification, Corsair expressed concern that we would be testing performance and overclocking of their Value products when memory chips change frequently on these products. The concern is that the overclocking performance we would report in a roundup today might not be what a customer would get tomorrow because chips change frequently in value products. Corsair recommended that customers looking for overclocking and enthusiast level performance should purchase Corsair products that are geared to performance and overclocking, where results are consistent.
The Value RAM roundup resulted with seven memory pairs from four manufacturers.
| Manufacturer | Description (Memory Chips) |
Memory Speed | Rated Timings | Web Price (1GB) |
| Kingston | KVR400X64C25/512 (Kingston) |
400 DDR | 2.5-3-3 | $142 |
| Kingston | KVR400X64C3AK2/1G (Elpida) |
400 DDR | 3-3-3 | $100 ($91 on sale) |
| Mushkin | EM Series PC3200 (Unknown) |
400 DDR | 3-3-3 | $147 |
| OCZ | PC3200 Premier P/N OCZ4001024PDC-K (PSC) |
400 DDR | 2.5-3-3-7 | $121 |
| OCZ | PC3200 Value Series P/N OCZ4001024WV3DC-K (Winbond - Value VX) |
400 DDR | 2.5-3-3-7 | $115 |
| OCZ | PC3200 Gold P/N OCZ4001024ELDCGE-K (Winbond BH5) |
400 DDR | 2-2-2-5 | $195 |
| Transcend | JM366D643A-50 (JetRam) |
400 DDR | 2.5-3-3 | $100 |
The seven memories represent quite a range of choices in memory under $200 for a Gigabyte. First, we were pleasantly surprised that all of the memories except one now actually cost below $150 for a Gigabyte. That one memory, OCZ PC3200 Gold, will still interest many Value RAM buyers because it represents the revival of Winbond BH5 chips, which were discontinued from the market over 6 months ago. We are told that Winbond is manufacturing BH5 again from old dies, and we will be testing this Value RAM at the higher voltages possible on the DFI nForce4 motherboard.
The other big surprise is also from OCZ. We learned (when OCZ introduced their VX memory at DDR500 2-2-2 speed) that there would also be a Value Series version of the VX. What we did not expect was that the new "Value VX" would cost just $115 for a Gigabyte of memory. These are the same chips that were top-performers in a recent memory review. The Value Series uses unbinned chips, so performance is not guaranteed, but we were still anxious to see if this or the new Value BH5 might be the proverbial "silk purse from a sow's ear" for the cheap computer enthusiast. We all like to get something for nothing - or, at least, for very little money.
As you will see from the results, there were quite a few surprises in Value RAM performance. This includes a few very cheap but solid performers that will satisfy many users, and a couple of memories that are as mundane as we expect of Value RAM. For those of you looking for dynamite performance at cheap prices, we also found that silk purse amongst the Value RAM candidates.
Facebook
Twitter
RSS
102 Comments
View All Comments
segagenesis - Tuesday, April 12, 2005 - link
Meh, I am lost for the life of me here. I dont see what the big fuss is over Value VX when I still cant find it. To save the comments http://tinyurl.com/46vg6 this doesnt look like the memory reviewed in the article being 3-4-4-8.Seeing how http://www.newegg.com/app/viewproductdesc.asp?desc... is $87 and I already have some and know it works well... im hard pressed to think I really need to buy "mystery memory".
Illissius - Tuesday, April 12, 2005 - link
Finally, is what I can say. However, if you really mean it when say you want to test real life performance, you should test with stuff from the actual standard benchmark suite - Quake 3 might show impressive gains from higher memory bandwidth, but does the same hold true for Doom 3?xsilver: While I agree that testing with the insane voltages available on DFIs limits the scope of the article somewhat, and results for lower voltages would've been nice to see (or at least mentioned specifically, it seems they're actually there for the BH5, though not the VX), I'm frankly more annoyed with all the other motherboard manufacturers for not allowing higher voltages (Abit in particular), than I am with AT for going ahead and testing with the only one that does. I wouldn't call it advertisement, more like a fair appraisal of capabilities.
Den - Tuesday, April 12, 2005 - link
I thought it was interesting to see in the charts that the Crucial Balistix which are $204 right now ($106 each but 4% off if you buy two and therefore JUST missed the price cutoff for this review) were consistently very good (faster than almost everything in this review) and are the only ones that can be that fast on more normal (non-DFI) voltages.xsilver - Tuesday, April 12, 2005 - link
Im not saying the dfi is bad or expensive.... its just that if you review with features that only the dfi can provide its not really a review / roundup anymore ..... its called an advertisment.... where's the choice?????I expect that dfi shareholders to be laughing really loud right now.... and OCZ too....
bigtoe36 - Tuesday, April 12, 2005 - link
Value VX is $115 if you shop around, how does this count it out of a value roundup?Should AT have only reviewed value ram that performs poorly?
OrSin - Tuesday, April 12, 2005 - link
#40 actually alot people would do just that.The DFI mother is not really that expensive.
Asus and gigabit are the the same price. 6800GT cards are high but if you want the best cards you buy them, to play the games. But how many times have anyone said what type of ram you need to play Doom 3 or HL. No one. If you don't over clock, then $90 ram will slow you system down what 1-2% over $300 ram. I got a A64 3400 and 800XL and kingmax ram. And my system runs alot fat then my friend with with a just 800 and $250 ram.
Sorry but buying high priced ram are mostly for over clockers and most people don't do that. Alot on these tech sites do, but my guess is even most people that buy $200+ ram don't
The review was nice to me.
xsilver - Tuesday, April 12, 2005 - link
another thing I want to clarify is that you make the assumption that you must be a "mad overclocker" if you buy the dfi because it can do 3.4v and all others that dont have the dfi are just posers..... many people would disagree but you seem to not notice???xsilver - Tuesday, April 12, 2005 - link
wesleyI understand what you say about making things consistent but arent then you just promoting the dfi board as no other board supports 3.4v? what about people who are going nforce 3 or intel (god forbid :P)
in trying to maximize the potential of the ram, you are limiting the practical application...
an analogy would be "in testing a ferrari its performance is great when drive it with brand X of fuel and feed it liquid oxygen".... umm... what about the rest of the people that dont use that?... that's why car reviews talk more about the "feel" & handling of the car, things that can be appriecieated by ALL customers....
and by specifying that this review was more for "mad overclockers" that may use the dfi then why even review the cheaper solutions that dont even overclock at all... I mean its not exactly fair when you compare the really cheap ram to some OCZ VX values now is it?
On one hand you try and generalize to the broader market but then on the other you say that you're only catering to the "mad overclockers" that buy the dfi
your original scientific basis / aim is a little unsound
bigtoe36 - Tuesday, April 12, 2005 - link
If your looking for value VX look here.http://www.atacom.com/program/print_html_new.cgi?c...
http://www.newegg.com/app/ViewProductDesc.asp?desc...
Look closely at the part number is has WV which stands for with winbond die, timings are usually 3-4-4-8 or 2.5-3-3-8 buit its all the same stuff.
adg1034 - Tuesday, April 12, 2005 - link
Where exactly can you find the Value VX? Do you have a model number? I was going to buy the Corsair Value RAM, but after reading this, I definitely think I'm going OCZ.